Barnstead 30400 Operation Manual page 33

8 S & 4 16 S
EGMENT X
2. Press the SCROLL button until display reads,
"tYPE."
3. Press the UP or DOWN button until display
reads, "cALL."
4. Press the SCROLL button until display reads,
"PrG.n."
5. Press the UP or DOWN button to select a pro-
gram number to be linked.
6. Press the SCROLL button until display reads,
"CYC.n."
7. Press the UP or DOWN button to select the
number of cycles the linked program is to be
run.
End
To end or repeat a program:
1. Press the PAGE button until you reach the pro-
gram list (ProG LiSt).
2. Press the SCROLL button until display reads,
"tYPE."
3. Press the UP or DOWN button until display
reads, "End."
4. Press the SCROLL button until display reads,
"End.t."
5. Press the UP or DOWN button to toggle
between "dwEll" (an indefinite dwell), "S OP"
(End Segment Output Power) and "rSET"
(reset).
P
EGMENT ROGRAMMABLE
M /OTP
ODELS W
33