Table of Contents
Advertisement
LOG SENSE
Code
Flag
Type
2Bh
Loader Door
2Ch
Loader
Hardware C
2Dh
Loader
Magazine
2Eh
Loader
Predictive
Failure
32h
Lost
Statistics
33h
Tape
directory
invalid at
unload
36h
No start of
data
SONY AIT-4 drive SDX-900V series Ver.2.1
Flag Type
Recommended application client message
O
C
The operation has failed because the autoloader
door is open:
1. Clear any obstructions from the autoloader
door.
2. Eject the magazine and then insert it again.
3. If the fault does not clear, turn the autoloader
off and then on again
4. If the problem persists, call the tape drive
supplier helpline.
O
C
The autoloader has a hardware fault:
1. Turn the autoloader off and then on again.
2. Restart the operation.
3. If the problem persists, call the tape drive
supplier helpline.
Check the autoloader users manual for device
specific instructions on turning the device power
on and off.
O
C
The autoloader cannot operate without the
magazine.
1. Insert the magazine into the autoloader
2. Restart the operation.
O
W
A hardware failure of the changer mechanism is
predicted.
Call the tape drive supplier helpline.
O
W
Media statistics have been lost at some time in
O
W
The tape directory on the tape cartridge just
unloaded has been corrupted.
File search performance will be degraded
The tape directory can be rebuilt by reading all the
data.
O
C
The start of data could not be found on the tape:
1.
Check you are using the correct format tape
2.
Discard the tape or return the tape to your
supplier
the past
6.Command Specification
Probable cause
Tape changer door
open
The loader mechanism
has a hardware fault
that is not mechanically
related.
Loader magazine not
present
Predictive failure of
loader mechanism
hardware
Drive or library powered
down with tape loaded
Error prevented the tape
directory being updated
on unload.
Tape damaged, bulk
erased, or incorrect
format
6-23
Advertisement
Table of Contents
