ClimateMaster ATC32U01 iGate User Manual page 11

AT C 3 2 U 0 1 C o m m u n i c a t i n g , P r o g r a m m a b l e T h e r m o s t a t - U s e r M a n u a l
NOTE: The thermostat must be confi gured for
programmable mode by installer to access the
Programmed Demand Reduction settings.
5.6.5.5.1 PROGRAMMED DEMAND
REDUCTION MODE
Through Programmed Demand Reduction
Mode, you can set the unit's limited operation
during the Programmed Demand Reduction
schedule.
Adjust the Programmed Demand Reduction
Mode settings using the up/down arrow buttons.
Press the center button to save changes.
DEMAND REDUCTION
OPTION FOR
PROGRAM OPERATION
NO DEMAND REDUCTION
NO AUXILIARY HEAT
NO 2ND STAGE COMP
SELECT OPTION
PREVIOUS
• No Demand Reduction (default): During
the scheduled Programmed Demand
Reduction time (section 5.6.5.5.4), the
system operates normally based on the
setpoints.
• No Auxiliary Heat: During the scheduled
Programmed Demand Reduction time
(section 5.6.5.5.4), auxiliary heat will not
be activated, regardless of the heating
demand.
• No 2nd Stage Compressor: During the
scheduled Programmed Demand Reduction
time (section 5.6.5.5.4), the compressor is
limited to only part load (1st stage) operation
and auxiliary heat is turned off, regardless of
system demand.
NOTE 1: The thermostat must be confi gured for
auxiliary heat by installer to access the Demand
Reduction NO AUXILIARY HEAT option.
NOTE 2: The thermostat must be confi gured
for Multistage by installer to access the Demand
Reduction NO 2nd STAGE COMP option.
5.6.5.5.2 Climadry™ - PROGRAMMED
DEMAND REDUCTION
This option allows for the customization
of Climadry™ (Dehumidifi cation, optional)
operation during the Programmed Demand
Reduction schedule.
SAVE
PROGRAMMED DEMAND
REDUCTION OPERATION
FOR CLIMADRY
WHEN DEMAND REDUCTION
IS ACTIVE
SUSPEND CLIMADRY
ALLOW CLIMADRY
SELECT OPTION
SAVE
PREVIOUS
Adjust the Programmed Demand Reduction
Climadry™ settings using the up/down arrow
buttons. Press the center button to save
changes.
• Suspend Climadry™ (default): During the
scheduled Programmed Demand Reduction
time (section 5.6.5.5.4), Climadry™ is
turned off, regardless of the dehumidifi cation
demand.
• Allow Climadry: During the scheduled
Programmed Demand Reduction time
(section 5.6.5.5.4), Climadry™ will operate
normally.
NOTE: The thermostat must be confi gured
for humidity control by installer and the DXM2
must be confi gured for Climadry™ operation to
access Demand Reduction Climadry™ settings.
5.6.5.5.3 FAN - PROGRAMMED DEMAND
REDUCTION
This option allows for the customization of
fan settings during the Programmed Demand
Reduction schedule.
PROGRAMMED DEMAND
REDUCTION FAN
OPERATION
WHEN DEMAND REDUCTION
IS ACTIVE
AUTO FAN ONLY
ALLOW CONSTANT FAN
SELECT OPTION
SAVE
PREVIOUS
Adjust the Programmed Demand Reduction
Fan settings using the up/down arrow buttons.
Press the center button to save changes.
• Auto Fan Only (default): During the
scheduled Programmed Demand Reduction
time (section 5.6.5.5.4), only auto fan mode
is allowed.
R e v. : 2 J u l y, 2 0 1 2
11