Power Led/Speaker; Atx Ps/2 Keyboard/Mouse Ports; Wake-On-Ring; Wake-On-Lan - Supermicro H8SSL-i User Manual

Power LED/Speaker

On JD1, pins 1, 2, and 3 are for the
power LED and pins 4 through 7 are
for the speaker. See the tables on the
right for pin defi nitions.
Note: The speaker connector pins are
for use with an external speaker. If
you wish to use the onboard speaker,
you should close pins 6 and 7 with a
jumper.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse ports are located beside the
USB ports. See the table on the right
for pin defi nitions.

Wake-On-Ring

The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a Wake-On-Ring card and
cable to use this feature.

Wake-On-LAN

The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
have a LAN card with a Wake-On-LAN
connector and cable to use the Wake-
On-LAN feature.
PWR LED Connector
Pin Defi nitions (JD1)
Pin# Defi nition
1 +Vcc
2 Control
3 Control
Speaker Connector
Pin Defi nitions (JD1)
Pin# Defi nition
4 Red wire, Speaker data
5 No connection
6 Buzzer signal
7 Speaker data
PS/2 Keyboard and Mouse Port
Pin Defi nitions
Pin # Defi nition
1 Data
2 NC
3 Ground
Wake-On-Ring
Pin Defi nitions
Pin#
1
2
Wake-On-LAN
Pin Defi nitions
Pin#
1
2
3
2-11
Chapter 2: Installation
(J1)
Pin # Defi nition
4 VCC
5 Clock
6 NC
(JWOR)
Defi nition
Ground (Black)
Wake-up
(JWOL)
Defi nition
+5V Standby
Ground
Wake-up