Table of Contents
Advertisement
9) Pairing
The Receiver DT10 can receive but not transmit pairing information. To pair the Receiver DT10 with your
Comfort Digisystem transmitter the Receiver DT10 must be connected either to your hearing instrument
or to the Programmer DT05.
Press the push-button on the Receiver DT10 for 2 seconds to activate pairing mode.
When pairing mode is activated, you receive an acoustic indication: • •
Send the pairing information within 15 seconds.
To interrupt pairing mode, briefly press the push-button.
Example 1:
Pairing a Receiver DT10 into an existing
Comfort Digisystem consisting of one Conference
Microphone DC10 and one Receiver DH10:
1.
Connect the Receiver DT10 to the hearing instru-
ment's audio shoe according to the instructions.
2.
Initiate pairing mode in the DT10 by pressing
the push-button for 2 seconds.
Acoustic indication: • •
3.
Start the Conference Microphone DC10.
4.
Rapidly press the pairing button on the DC10 twice.
The display on the DC10 responds with the text
"Info sent".
5.
The Receiver DT10 confirms success-
ful pairing with an acoustic indication:
Example 2:
Make a new eavesdrop secure configu-
ration with one Microphone DM10 and two hearing
instruments with Receiver DT10s:
1.
Connect the Receiver DT10s to the hearing instru-
ment's audio shoes according to the instructions.
2.
Activate pairing mode in the two DT10's by pressing
the push-buttons for 2 seconds.
Acoustic indication: • •
3.
Start the Microphone DM10 and open the menu.
Select Communication/Pairing/New code key and
answer Yes if you want to create a new code key and
transmit it.
4.
The Receiver DT10s confirm success-
ful pairing with an acoustic indication:
Example 3:
tion with one Microphone DM10 and two Receiver
DT10s using the Programmer DT05:
1.
Put one of the Receiver DT10s into the Programmer
DT05.
2.
Start the Programmer DT05 and connect head
phones or a neck loop to be able to listen.
3.
Activate pairing mode for the DT10 by pressing the
push-button for 2 seconds.
In the headphones/neckloop you receive an acoustic
indication: • •
4.
Start the Microphone DM10 and open the menu.
Select Communication/Pairing/New code key and
• •
answer Yes if you want to create a new code key and
transmit it.
5.
The Receiver DT10 confirms success-
ful pairing with an acoustic indication:
6.
Remove the paired DT10 and connect the other
DT10 into the Programmer DT05.
7.
Activate pairing mode on the DT10 by pressing the
push-button for 2 seconds.
In the headphones/neckloop you receive an acoustic
indication: • •
8.
Open the menu on the DM10 and select
Communication/Pairing/Send info .
9.
The Receiver DT10 confirms success-
ful pairing with an acoustic indication:
• •
Receiver DT10
Make a new eavesdrop secure configura-
• •
• •
8
Advertisement
Table of Contents
