3) Overview - Receiver DT10 4) Check the hearing instruments input 5) Getting started 6) Acoustic indication, sound signals 7) Modes in the Receiver DT10 8) Output for user with different input types and programs in the hearing instrument 9) Pairing...
1) Regulatory information Comfort Digisystem products are not to be used as a substi- tute to the hearing aids and should be used in accordance Conforms to UL Standard for Safety for Audio, Video and with the specifications and recommendations provided by Similar electronic apparatus –...
Comfort Digisystem Receiver DT10 — the world’s first digital mini receiver The Comfort Digisystem Receiver DT10 is a digital mini receiver that you can easily connect to any hearing aid with a standard three-pin Europlug audio shoe. The receiver weighs 0,05 oz (1,5 g) and is powered by the hearing instrument’s battery.
Check that the audio shoe is connected to the hearing instrument according to the manufacturer’s instruc- tions. Make sure that the Receiver DT10 is fitted in the correct manner and push the Euro-plug completely into the socket of the audio shoe.
Output for the user is shown in the white sections of the charts below. Receiver DT10 with R mode enabled (default setting) The chart below shows the output (what the user can hear) when Receiver DT10 listening mode R is enabled in combination with different input types and programs in the HI.
Page 7
R and R+M modes even if the Receiver DT10 has been programmed with identical output levels for the two modes. The reason for this difference is that the output level in the Receiver DT10 is affected by the input impedance of the hearing instrument.
9) Pairing The Receiver DT10 can receive but not transmit pairing information. To pair the Receiver DT10 with your Comfort Digisystem transmitter the Receiver DT10 must be connected either to your hearing instrument or to the Programmer DT05. Press the push-button on the Receiver DT10 for 2 seconds to activate pairing mode.
Order separately Function indicator Volume button - Socket for Volume button + neckloop On / Off Charging socket Menu control Pairing button Socket for headphones / earphones 11) Included accessories Volume indicator • Headphones • Charger A11 Europlug socket Receiver DT10...
Always on The Programmer DT05 can also be used to configure all Send all settings at the same time in a DT10. To do this, adjust all Settings parameters in the DT05 and then select Send all on the - Language DT05 menu.
13) Battery maintenance Programmer DT05 Pairing When Pairing is selected, the DT10 can be set to pairing mode by pressing the push-button for two seconds. The rechargeable products in the Digisystem series are If Pairing isn’t selected, pairing mode cannot be enabled equipped with Li-Pol batteries, ie.
Check that the Comfort Digisystem units you are using are paired together. This Limited Warranty does not cover If Auto sleep is enabled, the Receiver DT10 goes into Damage from misuse, neglect or normal wear and tear. sleep mode if there is no radio signal. But if another Products that have been modified.
A polarized plug has two blades with different widths and will only fit into the socket Like all radio systems, Comfort Digisystem communi- one way. A grounded plug has a third grounded cates on specific channels. If you use two transmitters prong.
Page 14
Manufactured by: Comfort Audio AB Comfort Audio AB, Box154, SE-301 05 Halmstad, Sweden Tel. +46 (0)35 260 16 00 Fax +46 (0)35 260 16 50 Local US office: Comfort Audio Inc, 350 South Northwest Hwy, Ste 300 Park Ridge, IL 60068 USA T (847) 656 5450 usa@comfortaudio.com www.comfortaudio.us...