Table of Contents
Advertisement
2) Introduction to the Comfort Digisystem
Thank you for choosing Comfort Digisystem. Our products are easy to use and give you crystal clear sound.
Before using the product, please read this manual carefully. The Comfort Digisystem products feature SecureStream
Technology – a unique, patented digital technology allowing eavesdrop-secure radio transfer in real time.
Comfort Digisystem Receiver DT10 — the world's first digital mini receiver
The Comfort Digisystem Receiver DT10 is a digital mini receiver that you can easily connect to any hearing aid with a
standard three-pin Europlug audio shoe. The receiver weighs 0,05 oz (1,5 g) and is powered by the hearing instrument's
battery. To minimize energy consumption, the mini receiver is equipped with an optional auto-sleep feature.
Together with existing microphones and receivers in the Comfort Digisystem assortment, the Receiver DT10 provides
clear speech perception. The Receiver DT10 is the world's first mini receiver, taking full advantage of digital technology
in enabling outstanding sound reproduction.
The optional professional tool Programmer DT05 can be used to configure the Receiver DT10.
The Programmer DT05 also makes it easy to test the Receiver DT10 with or without a hearing instrument.
3) Overview - Receiver DT10
Europlug
For connecting to the
audio shoe on a hearing
instrument or to
the socket on the
Programmer DT05.
4) Check the hearing instruments input
To be able to use the Receiver DT10, check if — and how
— the hearing instrument supports the use of a mini
receiver:
1. The hearing instrument must be equipped with an
audio shoe with a powered Europlug socket made for
mini receiver use. This connects the Receiver DT10
to the hearing instrument and also supplies the DT10
with power from the hearing instrument's battery. The
received audio signal will then be transferred from the
Receiver DT10 to the hearing instrument through the
audio shoe.
2a. If the hearing instrument is equipped with a
Programmable DAI input (DPAI), programming of the
hearing instrument might be necessary (check with
audiologist or hearing instrument manufacturer). In
this case the push-button on the Receiver DT10 cannot
switch between the R and R+M modes. This is instead
done by using different listening programs in the hear-
ing instrument.
Europlug
TIP!
The volume of the Receiver DT10's R and R+M mode
can be set individually by using the Programmer DT05.
This makes it possible to use the push-button as a simple
volume control in combination with a hearing instrument
with Programmable DAI input (DPAI).
Receiver DT10
Push-button
For toggling between
different listening modes
and activating pairing mode.
4
Advertisement
Table of Contents
