Yamaha YZF600RS Owner's Manual page 49

1. Auxiliary light lead coupler (left side)
2. Turn signal light lead connector
To install the cowling
1. Connect the turn signal light lead
connectors (and, for the left-side
cowling, also the auxiliary light
lead coupler).
2. Place the cowling in the original
position, and then install the bolts.
Cowling B
To remove the cowling
1. Remove the seat. (See page 3-9.)
2. Remove the screws, and then pull
the cowling off as shown.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw
NOTE:
Pull the cowling up, then back to re-
move it.
To install the cowling
1. Place the cowling in the original
position, and then install the
screws.
2. Install the seat.
EAU19050
Cowling D
To remove the cowling
1. Remove the seat and cowling B.
(See pages 3-9 and 6-8.)
2. Remove the grab bar by removing
3. Remove the screw, and then pull
1. Bolt
2. Screw
To install the cowling
1. Place the cowling in the original
2. Install the grab bar by installing the
EAU19020
3. Install the cowling and the seat.
6-9
the bolts.
the cowling off as shown.
position, and then install the
screw.
bolts.
6