SPHINX REMOTE CONTROL
This single Sphinx Remote Control lets you control
all functions: not only of the Project Thirty-two but
also of all other Sphinx equipment.
Only the following buttons on the Remote apply to
the Project Thirty-two CD player, the other buttons
will not function:
Buttons
1.
CD: To select the CD player. All buttons
pressed hereafter will control only the CD
player functions.
Note: The TUNER and PRE-AMP buttons will
not function.
2.
STANDBY: Only works if you use a Sphinx
(pre-)amp and the Project Thirty-two is
connected via the optical cable.
3.
1 - 0: With these numbered buttons you may
select each CD track directly. To input a two
digit number (e.g. 16): shortly depress the
button for the first digit (the display shows »1—
«) and immediately select the second digit (6).
If you wait to long the player will select track 1.
Example: To select track 16 press 1 and 6.
4.
TUNING: With these two buttons you may
directly select the digital inputs for the D/A
converter: CD player, COAX or OPTICAL.
Note: Without the Remote this feature can only
be selected via the Set-up mode.
When in Set-up mode these buttons are used
to select the values for the different settings.
5.
STOP: This button has the same function as
the STOP button on the front panel (4).
6.
PAUSE: This button has the same function as
the PAUSE button on the front panel (9).
7.
PLAY: This button has the same function as
the PLAY button on the front panel (9).
8.
SETUP: This button has the same function as
the SETUP button on the front panel (5).
9.
PREV. TRACK: This button has the same
function as the PREV button on the front panel
(8).
10. REV. SEARCH: This button has the same
function as when you keep the PREV button on
the front panel (8) depressed.
11. FWD. SEARCH: This button has the same
function as when you keep the NEXT button on
the front panel (10) depressed.
12. NEXT TRACK: This button has the same
function as the NEXT button on the front panel
(10)
SPHINX
Project 32
11
Need help?
Do you have a question about the Project 32 and is the answer not in the manual?
Questions and answers