ARC Audio KS 1200.1 Owner's Manual

ARC Audio KS 1200.1 Owner's Manual

Class h mono block high performance audio amplifier

Advertisement

KS 1200. 1
KS 1200. 1
KS 2500. 1
KS 2500. 1
CLASS H
MONO BLOCK
High Performance Audio Amplifier
ARC AUDIO WARRANTY AND
SERVICE GUIDELINES
ARC AUDIO warrants all new KAR Series Amplifiers against defects in
material and workmanship for a period of ONE (1) YEAR from the original date of
purchase. This warranty is not transferable and applies only to the original retail
purchaser of the product from an authorized ARC AUDIO retailer. Upon inspection by
ARC AUDIO should services be necessary under this warranty for any reason due to
manufacture defects ARC AUDIO will, at its sole discretion, repair or replace the
defective product with new or similar conditioned product at no charge.
THIS WARRANTY DOES NOT COVER INSTALLATION OR DAMAGE
RESULTING FROM ACCIDENT, MISUSE, ABUSE, IMPROPER WIRING,
OPERATION OUTSIDE OF UNIT OUTSIDE OF MANUFACTURES SPECIFICA-
TIONS, OR AGAINST INSTRUCTIONS IN OWNERS MANUAL. IN ADDITION
ANY PRODUCT THAT HAS BEN OPENED, TEMPERED WITH OR MODIFIED,
OR IF ANY SERIAL NUMBERS HAVE BEEN REMOVED WILL NOT BE
COVERED BY ANY PART OF THE MANUFACTURES WARRANTY.
All warranty returns should be sent to ARC AUDIO freight prepaid and must be accompa-
nied by proof of purchase (a copy of the original sales receipt). Direct returns from
consumers or non-authorized retailers will be refused unless specifically authorized by
ARC AUDIO with a valid return authorization number. To receive a Return Authorization
number call ARC Audio Warranty Department. Be prepared to give you name, address,
phone number, model number and serial number of the defective unit..
All warranty returns should be packed in original packaging and must be accompa-
nied by a copy of the original sales receipt. Product damaged in shipment will not be
covered under this warranty. The customer or retailer may choose to have this
damage repaired at the normal "Out of Warranty" repair cost.
In no event will ARC AUDIO be liable for incidental, consequential, or other damages
resulting from the use of this product, this includes but is not limited to, damage of
hearing, property or person, damage based upon inconvenience or on loss of use of the
product, and to the extent permitted by law, damages for personal injury. This warranty
gives you specific legal rights, and you may have other rights, which vary from state to
state. This warranty applies to products sold and used in the United States of America. In
all other countries please contact your distributor.
For warranty and non-warranty repairs, send to:
ARC Audio
4719 Greenleaf Cr. #4
Modesto CA, 95356
REV. 2011-9-26-M.Z.

Advertisement

Table of Contents
loading

Summary of Contents for ARC Audio KS 1200.1

  • Page 1 COVERED BY ANY PART OF THE MANUFACTURES WARRANTY. MONO BLOCK All warranty returns should be sent to ARC AUDIO freight prepaid and must be accompa- nied by proof of purchase (a copy of the original sales receipt). Direct returns from...
  • Page 2 If you are unsure have your charging Warning system tested by a professional technician. We build all ARC Audio products to play at high volumes for extended periods of time. Your ears however are not designed for high volume listening. This product can The Ground!!! easily generate volumes that can permanently damage your hearing.
  • Page 3: Input Section

    Input Section Bass Boost Because of the wide range of head unit output configurations all ARC This amp has a fully adjustable bass boost. Both the frequency and the Audio amplifiers have an adjustable input sensitivity or “Gain” . The gain level of the boost are adjustable.
  • Page 4: Auto Sense

    AUTO SENSE Bridging The KS 1200. 1 and KS 2500. 1 uses a Patent Pending Auto Sense Turn-on circuit that offers a significant improvement in reliability over previous designs. Instead of relaying on Bridging is a way to combine the power of 2 channels into 1. When you wire the amp the music to supply enough signal to turn the amplifier on.
  • Page 5 Installation Instructions Connect the speaker wire to the amp and speakers (make sure the amp is off first). Make sure the polarity (+ and-) is correct. Disconnect the negative cable from the car battery. Tape up the end so it is isolated form the battery. Connect the RCA’s to the amp.
  • Page 6: Specifications

    SET INPUT TO SET PHASE TO NORMAL KS 1200. 1 KS 1200. 1 2 3/8” 60 mm KS 1200.1 KS 2500.1 15 1/2” 20 1/2” 390 mm 520 mm 8“ TURN KS 1200. 1 KS 1200. 1 205 mm SPECIFICATIONS KS 1200.
  • Page 7: Bridging 2 Amplifiers

    BRIDGING 2 AMPLIFIERS In this configuration you can “Bridge” 2 amplifiers into 1 channel. To bridge 2 amps you must set amp 1 to “Normal” and amp 2 to “Slave” . All adjustments will then be made to amp 1. Amp 2 will need no further adjustments SET INPUT TO SET PHASE TO...
  • Page 8 KS 1200. 1 DUAL BATTERY POWER CONNECTIONS KS 2500. 1 DUAL BATTERY POWER CONNECTIONS KS 1200. 1 KS 1200. 1 TURN KS 1200. 1 KS 1200. 1 REMOTE REMOTE OPTIONAL FUSE FUSE FUSE FUSE Battery or Battery or Capacitor Capacitor This is a stock ground wire on the This is a stock ground wire on the battery between the battery and...

Table of Contents