Troubleshooting - EB Excalibur Sky Runner User Manual

Safety Tips:
• Read through the entire instruction manual, before attempting to pilot your
helicopter.
• This product is intended for indoor use, and works best indoors. We do not
recommend using the product outdoors.
• Never attempt to fl y your helicopter in a cluttered space. This helicopter was
intended for obstacle free wide area spaces.
• Make sure all people and animals are 3-5 feet from the helicopter before you
start fl ying it.
• Always keep focus on your helicopter, and do not attempt to fl y/land/or
crash anywhere on or near any other people or animals.
• The rotating parts on the helicopter could lead to injury. Never put any body
part including the hands and face, close to the rotating parts. Only
operate this product standing, as it allows for quick movement away from
the helicopter if necessary.
• Never operate the helicopter using parts that are altered in shape or
damaged in any form.

Troubleshooting:

Problem
Helicopter is not Channel selection on the
responding to remote remote.
Interference of another
Loss of Control remote controlled device
Interference by other
conditions such as
lighting.
Helicopter Spinning out Incorrect trim
of control adjustment.
Helicopter suddenly stops Weak battery power.
and drops midfl ight or
seems to have weak
performance
Propellers are not moving Helicopter is powered off .
Weak battery power.
US9969IS01EXC.indd 6 US9969IS01EXC.indd 6
Cause
Gently press forward on the left joystick and
switch between all 3 channels until the helicopter
takes fl ight.
Avoid all other remote controlled devices running
on the same channel.
Change environment to better suited conditions.
Adjust the trim as shown above to fi nd the proper
adjustment.
Recharge the helicopter battery. If this does not
work, replace the batteries in the remote and
recharge off fresh batteries.
Set the ON/OFF Switch to the ON position.
Recharge the helicopter battery. If this does not
work, replace the batteries in the remote and
recharge off fresh batteries.
6
Correction
7/29/11 11:32 AM 7/29/11 11:32 AM