ongratulations on your new EXRC purchase! EXRC pilots experience superior remote control fl ight and excellence in the look and feel of our products while commanding the skies. Now that you are an honorary EXRC pilot, we recommend reading through this manual thoroughly before attempting your fi rst fl ight.
FLYING YOUR HELICOPTER GETTING STARTED • Set the frequency band on the controller to match the frequency on the helicopter. • Switch the helicopter’s ON/OFF switch to the ON position. The power light will turn on. • Place the helicopter on the ground with the tail pointed toward you and the nose facing away from you.
DIRECTION CONTROL - TRIM KNOB If the helicopter rotates during fl ight, use the Rudder Trim Knob to adjust. 1. Clockwise Rotation - when the helicopter is spinning counter- clockwise, turn the Rudder Trim Knob clockwise to adjust. 2. Counterclockwise Rotation - when the helicopter is spinning clockwise, turn the Rudder Trim Knob counterclockwise to adjust.
crash anywhere on or near any other people or animals. • The rotating parts on the helicopter could lead to injury. Never put any body part including the hands and face, close to the rotating parts. Only operate this product standing, as it allows for quick movement away from the helicopter if necessary.
CARE & HANDLING • Do not submerge in water or other liquids. • Do not disassemble the product for any reason. • Do not expose to extreme temperatures. • Do not drop, throw, smash or otherwise cause physical shock. • Clean using only a slightly damp cloth. •...
Page 8
Army Trademark Licensing Program, and net licensing revenue is de- voted to U.S. Army Morale, Welfare, and Recreation programs. U.S. Army trademarks and copyrights are used under the offi cial license of the U. S. Army. EB Excalibur, Inc. Miami, Florida www.EBExcalibur.com service@ebexcalibur.com...