Change The Number Of Rings Before Pickup - ClearSounds A500 User Manual

Change the number of rings before pickup

By default, your answering machine picks up calls after
the third ring. You can use the base or the handset to
change this setting.
You can set it to pick up after two, three, four, five, six,
seven, eight or nine rings.
If you would like the machine to pick up after five rings
but after two if new messages are waiting, select Toll
Saver (TS). Toll Saver is helpful in this way: If you check
messages from a remote, long-distance location, and the
machine doesn't pick up after two rings, you know that
there are no new messages. You can hang up and avoid
incurring a long-distance fee.
5. Press the numeric keys to enter the
current three-digit security code, and
then press
New PIN: appears on the screen.
6.
Press the numeric keys to enter the
new three-digit security code, and
then press
Again appears on the screen.
7. Repeat Step 6.
DTAM PIN changed appears on
the screen.
.
.
93