Specifications; Technical Data - AER COMPACT 60 2 Operating Manual

5. Technical Data

Inputs
Input (channel 1) Stereo jack ¼" (6.35 mm)
High impedance, unbalanced jack input for
instruments (pick-ups) and line-level sources.
high/low switch: –10 dB attenuator
Impedance: 2.2 Meg
Input (channel 2) Combo socket, XLR jack ¼" (6.35 mm)
line mode:
High impedance, unbalanced jack input for
instruments (pick-ups) and line-level sources.
Sensitivity: 38 mV
Impedance: 1 Meg
mic mode:
XLR (balanced), stereo jack (balanced),
or mono jack (unbalanced) input.
Voice Filter
24 V-Phantom-Power through 6.8 kohms
to XLR socket
Clip indicator: Headroom 6 dB
Return Return from external parallel effect loop
Sensitivity: 430 mV
Clip Headroom: 15 dB
Attack Time: 4 ms
Outputs (note 3)
Phones
Headphones output. When connected, internal
speakers are muted.
Stereo jack, ¼" (6.35 mm)
Output power: 100 mW
Caution: For stereo headphones with stereo jack
plug only. Do not connect mono plugs.
Tuner Tuner output. Mono jack, ¼" (6.35 mm)
Output voltage: 310 mV
Line out
Line output after tone controls,
with return and effects.
Mono jack, ¼" (6.35 mm).
Output Voltage: 1.3 V
DI-out Line output after tone controls,
with return and effects.
Mono jack, ¼" (6.35 mm).
Output Voltage: 1.3 V
Send Send for parallel effect loop
Mono jack, ¼" (6.35 mm)
Output voltage: 1.3 V
6
Tone controls
channel 1: ± 8 dB at 100 Hz
Bass
channel 2: ± 8 dB at 100 Hz
channel 1: ± 6 dB at 800 Hz
Middle
Treble channel 1: ± 8 dB at 10 kHz
channel 2: ± 11 dB at 10 kHz
Effects
Internal effect
digital effect processor with 4 factory presets
1 – warm hall
2 – bright hall
3 – chorus with reverb
4 – flanger
External effect Parallel effect loop (see send and return)
Power
Power amp 60 W at 4 ohms,
discrete bipolar transistor design
Analog signal
Subsonic filter, low distortion RMS limiter
processing
Speaker system 8" (200 mm) twin cone speaker
Mains power AC 230 V, 50-60 Hz, max. 120 W
(other mains voltage available)
Mains fuse slow 1 A for 230-240 V
slow 2 A for 115 V
slow 2 A for 100 V
General
Cabinet 15 mm (0.6") finnish birch plywood
Finish Waterbased acrylic, choco spatter finish
Dimensions 265 mm (10.4 ") high
330 mm (13 ") wide
235 mm (9.25 ") deep
Weight 7,55 kg (16.65 lbs)
Notes:
Input levels refer to 50 Watts output.
Output levels refer to 50 mV input at channel 1.
Specifications and appearance subject to change without notice.