Specifications; Technical Data - AER Basscube Operating Instructions Manual

Basscube

5. Technical Data

Inputs:
Ch1: XLR-Combi
line: unbalanced, 1 MEG, stereo,
(ring: 9V/15V phantom power)
piezo: unbalanced, >10 MEG, Bultra
high impedance inputstage
mic: balanced, 1 k, 48V phantom
power
Ch2: line: unbalanced, 1 MEG
piezo: unbalanced, >10 MEG, Bultra
high impedance inputstage
Ch3: XLR-Combi
line: unbalanced, 1 MEG, stereo
mic: balanced, 1 k, 48V phantom
power
Return: effect-return, mono 0dBV/22k
Aux-In: cinch, stereo 0dBV/22k
Outputs:
DI: balanced, adjustable -20dBV to -
10dBV (1=gnd, 2=pos, 3=neg)
Line: unbalanced, 0dBV, pre master
Active Sub out:
unbalanced, 0dBV, post master
Tuner: unbalanced, -10dBV
Headphones: 2 x mono, 2 x 320 mW at min. 4 ohms
Footswitch: mono
Send: effect-send 0dbV
ext. speaker passive:
min 8 ohms
eq:
ch1/2: bass: ±10 dB/ 80 Hz
middle: ±10 dB/ 200 Hz - 1 kHz
treble: ±10 dB/ 10 kHz
colour: -3 dBV/ 700 Hz and +
10 dBV/ 10 kHz
ch3: bass: ±06 dB/ 100 Hz
treble: ±10 dB/ 10 kHz
Notch: cut: -14 dBV/ 30-400 Hz
Compressor:
threshold: -40 dBV - 0 dBV
ratio: 1:1 to 20:1
-11-
Analog Signal
Processor: limiter, displacement filter
Power Amp:
Powerconsumption:
220-240 V / 50-60Hz /
400 VA (110V / 50-60Hz)
rating: bass 340 watts / 8 ohms rms
tweeter 360 watts / 8 ohms rms
freq.resp: 20 Hz - 30kHz
fuse: 6.13 A slow
Speaker:
bass: 12" B&C longcoil di-cast chassis
(96 dB 1w/1m, freq.range 38 Hz-
2 kHz)
tweeter: B&C cone tweeter (103 dB 1w/1m,
freq.range 5 -16.5 kHz)
X-over: active two-way, 4 kHz / 24 dB/
oct., LR-filter
Cabinet: 10.71" 3(18 mm) birch plywood
Dimension: 15.75" (400 mm) wide
15.75" (400 mm) high
14.33" (364 mm) deep
Finish: waterbased acrylic, black spatter finish
Weight: 53.3 lbs. (25 kg)
0dB/V ~ 1V
Specifications and appearance subject to change without notice
C
Audio Electric Research GmbH&Co. KG
Christine-Englerth-Straße 30
D - 45665 Recklinghausen
Telefon: +49 (0)2361 - 891789 / -90
Telefax: +49 (0)2361 - 891798 / -99
C