Global Mode; Kill Midi; Midi Common Channel - Akai MPD32 Operator's Manual

GLOBAL MODE

In Global Mode, you can send global
messages and make general changes to the
way that your MPD32 functions.
Mode options are organized under different
pages and include the list of options shown
on the right:
To enter Global
[GLOBAL] button. To scroll through the
different pages, use [<] and [>].
KILL MIDI – Page1
MIDI COMMON CHANNEL – Page 2
MIDI COMMON CHANNEL FIELD
Global
Mode, press the
KILL MIDI allows you to send either an ALL NOTES OFF message on
each MIDI Channel or a RESET ALL CONTROLLERS command.
ALL NOTES OFF is a special MIDI message used to turn off any notes
that might be playing on the MPD32. It is often used to recover from
erroneous stuck notes.
RESET ALL CONTROLLERS is a MIDI message used to return all
values such as aftertouch to their default settings. Control reset will
return all values to their default settings.
1. Press [GLOBAL] to enter Global Mode. "Kill MIDI" will be the first
option which appears on the screen.
2. Turn [VALUE] dial to select either an ALL NOTES OFF or a
RESET ALL CONTROLLERS message.
3. Press [ENTER] to transmit the message.
You can assign the MIDI Common Channel to a specific MIDI Channel
(i.e. A1). Any and all pads, buttons, knobs or faders assigned to the
MIDI Common Channel (CC) will transmit MIDI information via the
channel number that you select in this field.
1. While in Global Mode, press [>] button to scroll to MIDI Common
Channel (page 2).
2. Turn [VALUE] dial to select desired MIDI Channel.
3. Press [ENTER] to set the MIDI Channel.
Note: If you change which channel the MIDI Common Channel is
using, you need to set any device that is controlled by the Common
Channel to receive on the same channel.
MIDI COMMMON CHANNEL
LCD CONTRAST
PAD SENSITIVITY
PAD VELOCITY CURVE
PAD THRESHOLD
TAP TEMPO AVERAGE
SAVE SETUP
27

KILL MIDI

MIDI CLOCK
SYSEX TX
VERSION
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11