Section 5: Accessories - Grizzly G0624 Owner's Manual

ACCESSORIES

SECTION 5: ACCESSORIES

G1194—3-Jaw Chuck
A "must have" for the serious wood turner. This
3-jaw chuck is a self-centering style chuck used
mostly for round work. All three jaws tighten
together at the same time. Jaws are reversible for
expanded work holding capacity. Threaded insert
required for mounting!
Figure 28. Model G1194 3-Jaw Chuck.
G1082—4-Jaw Chuck
Another "must have" for the serious wood turner.
This 4-jaw chuck is an independent type chuck
that is used for square and odd-shaped pieces.
Each jaw tightens individually and can be turned
around to hold larger dimension workpieces.
Threaded insert required for mounting!
Figure 29. Model G1082 4-Jaw Chuck.
G0624 10" Benchtop Lathe
G3163—1" x 8 TPI RH Threaded Insert
This threaded insert is required to mount a 3- or
4-jaw chuck to your wood lathe.
H7828—Tool Table Plus
The new Tool Table Plus was designed in response
to customer requests for a slightly wider and
taller table to accommodate small planers, wood
lathes, sanders and a variety of other bench-top
machines.
Figure 30. Model H7828 Tool Table Plus with
Model G0624.
G0625—Bed Extension
With the Model G0625 Bed Extension attached,
the Model G0624 lathe can turn up to 38" between
centers.
Figure 31. Model G0624 with Model G0625 Bed
Extension.
-21-