Samsung SCP-2430H User Manual page 36

setup
2. Select the preset number.
Select <POSITION> and adjust <PAN/
3.
TILT/ZOOm> to the desired setup using
the joystick.
Set <PRESET ID> to <ON> and enter the
4.
name.
For entering the name, refer to "CAMERA ID".
(page 24)
5. Select <PRESET SPEED> and adjust the
pan/tilt speed of the preset.
Set the <DWELL TImE> that defines the
6.
camera's hold duration and <ImAGE HOLD> of the preset.
If you set the <IMAGE HOLD> to <ON>, the video image will be held still until the
camera reaches the preset position.
7. Set <CAmERA SET> to <ON>.
You can adjust camera setups for each
preset.
For details on setting <IRIS>, <WHITE BAL>
and <FOCUS MODE>, refer to "CAMERA
SET". (pages 24 ~ 32)
M
The preset position can be specified for a
tilt range of between 0° and 90°.
Those presets that are out of a tilt of 90° can not be specified.
If you try to specify a preset position for a range exceeding a tilt of 90° using a
controller (SSC-1000, 2000 or 5000), you will see a message of <SET AGAIN> on
the screen. If this is the case, try again for a range below a tilt of 90°.
If you upload/download the menu setting using SSC-1000, 2000 or 5000, the preset
may differ from the menu setting so define the preset again after the operation.
_ setup
PRESET

0 1 2

5 6 7
10 11 12
15 16 17
20 21 22
25 26 27
30 31
1/16
 
PRESET NO. 1
POSITION
PRESET ID
PRESET SPEED
DWELL TIME
IMAGE HOLD
CAMERA SET
CAMERA SET
IRIS
WHITE BAL
FOCUS MODE

3 4
8 9
13 14
18 19
23 24
28 29
ON
[ 5 ]
3SEC
OFF
ON
ALC
MF