Samsung SCP-2430H User Manual page 27

FLICKERLESS
This will prevent possible screen distortion due to a mismatch between the vertical
sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter
speed will be fixed to 1/120 second.
If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is
not available.
xDR
This will correct a brightness difference between different scenes for the optimal
visibility by calculating the ambient luminance contrast in a certain unit of pixels.
The higher the value is, the higher the correction level is.
DAy/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1. Select <CAmERA SET> - <DAy/NIGHT>.
2. Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of

the scene.
NIGHT : Fixed to NIGHT mode,

regardless of the scene.
If BURST is set to <ON>, the burst
signal will be output along with the
black-and-white composite video signal.
AUTO : According to the luminance, this

will switch DAY to NIGHT mode, or vice
versa.
- BURST : If set to <OFF>, the burst
signal will not be output in NIGHT mode.
- DAY  NIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW filter.
Adjusting from HIGH to LOW will cause
to switch the filter in a darker screen.
- DAY  NIGHT DWELL TIME : Time
required to determine the filter switch.
- NIGHT  DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the
filter in a darker screen.
DAY/NIGHT
WHITE BAL
FOCUS MODE
ZOOM SPEED
DISPLAY ZOOM
DISPLAY P/T
DIGITAL ZOOM
DETAIL
V-SYNC
AUTO
BURST
DAY NIGHT

BRIGHTNESS
DWELL TIME
NIGHT DAY

BRIGHTNESS
DWELL TIME
MASK AREA
English _
AUTO
ONEAF
[ 2 ]
OFF
OFF
OFF
[ 2 ]
INT
OFF
MID
2SEC
MID
5SEC
1 2