Table of Contents
Advertisement
General
Regular periodic maintenance on your
Model G5968/9 Angle Grinder will ensure
its optimum performance. Make a habit of
inspecting your grinder each time you use
it. Check for the following conditions and
repair or replace when necessary:
• Loose fasteners.
• Worn switch.
• Worn or damaged cords and plugs.
• Any other condition that could hamper
the safe operation of this equipment.
Keeping Tool Clean
The Model G5968/9 Angle Grinder will
give you years of trouble free service if you
keep it clean and free of built-up dust or
grime. Ensure that no air passages get
blocked. If they do, blow them out with
compressed air.
Plastic parts can easily be cleaned with a
damp cloth, but never use water to clean
any electrical parts. Solvents should also
be avoided on plastic because of the pos-
sibility of damage.
Wear safety glasses when cleaning
tool with compressed air.
G5968/9 Angle Grinder
MAINTENANCE
Brushes
The brushes need to be checked periodi-
cally to ensure optimum performance. If
the brushes need to be replaced, simply
unscrew the plastic cap on both sides of
the grinder back by the trigger. Pull out
and inspect the brushes. Either re-install
or replace the brushes at this time.
Repair and Service
All quality tools will eventually wear from
normal use. Since the grinder is encased
in a double insulated plastic cover, leave
repair and service issues to a qualified ser-
vice technician.
Technical Data
Model:
Rated Voltage:
Rated Frequency:
Rated Power Input:
No-Load Speed:
Disassembly and improper reassem-
bly of this device can result in elec-
trical shock danger. Always have this
device serviced by a qualified electri-
cal repair technician. Serious injury
will result.
G5968
G5969
110V
110V
60 Hz
60 Hz
450W
700W
11,000
10,000
RPM
RPM
-5
-
Advertisement
Table of Contents
