Installation Of Ink Ribbon And Paper; Installation Of Ink Ribbon - Star DP8340 SERIES User Manual

4. INSTALLATION OF INK RIBBON AND PAPER

4-1.

Installation of Ink Ribbon

(1) Turn power off, lift the Printer Cover up and remove it.
Note: Be careful not to touch the print head immediately after printing,
because it can get very hot.
(2) Unwind ribbon so that the spools are separated as shown in Figure 4-3.
Hold the ribbon taut as shown with the drive pins facing down and slide the
ribbon between the print head and the platen. While keeping the ribbon taut,
wrap one side around the black ribbon guide on the end of the platen and
drop one spool on the spool shaft. As you move the spool downwards, move
the detecting lever aside to allow the spool to drop into place. Make sure the
spool drive pins engage with the spool drive holes. As the spool drops into
place there will be a click.
(3) While continuing to hold the ribbon taut, install the remaining ribbon spool
in a similar fashion.
(4) Turn the spool that rotates freely to take up the ribbon slack.
Ribbon Life
Description
SF-03BR
(Fuji Kagakushi
Kogyo Co., Ltd.)
Figure 4-1. Printer Cover Removal
Black
Approx.
0.8 million
characters
– 8 –
Ribbon life
Red
Approx.
0.4 million
characters