Fader Adjustment; Loudness Function; Antitheft Protection - Alfa Romeo 159 Owner's Manual

Alfa 159
Hide thumbs Also See for 159:
Table of Contents

Advertisement

FADER ADJUSTMENT

Proceed as follows:
❒ Use button N or O to select "FADER" in
the AUDIO menu;
❒ press button ÷ to increase the sound
from the rear speakers or button ˜ to
increase the sound from the front speak-
ers.
Pressing the buttons briefly the change is grad-
ual by steps. Pressing longer, changing is
faster.
Select "÷ 0 ˜" to set the same val-
ue for both front and rear speakers.

LOUDNESS FUNCTION

The Loudness function improves the sound
volume when listening at low level, in-
creasing the basses and trebles.
To switch the function on/off, use button
N or O to select "LOUDNESS" in the AU-
DIO menu. The function condition (on or off)
is shown on the display for few seconds by
"LOUDNESS ON" or "LOUDNESS OFF".
PRESET/USER*/CLASSIC/
ROCK/JAZZ functions
(equalizer on/off)
The integrated equalizer can be turned on
or off. With the equalizer off, it is possible
to change the sound settings only adjust-
ing the bass ("BASS") and treble tones
("TREBLE"), while activating the function
makes it possible to adjust the sound curves.
To turn the equalizer off, select "PRESET"
by means of button ÷ or ˜ .
To turn the equalizer on, use button ÷
or ˜ to select one of the following op-
tions:
❒ "USER" (adjustment of the 7 equalizer
bands that can be changed by the user);
❒ "CLASSIC" (predefined equalizer adjust-
ment for best playing of classic music);
❒ "ROCK" (predefined equalizer adjust-
ment for best playing of rock and pop mu-
sic);
❒ "JAZZ" (predefined equalizer adjustment
for best playing of jazz music).
When one of the equalizer settings is on,
the display shows "EQ".
*USER EQ SETTINGS function
(only if the USER equalizer
setting has been selected)
(excluding versions with
Bose HI-FI system)
To set a personal equalizer adjustment, use
button N or O to select USER and then
press button O for long.
The display shows a graph with 7 bars,
where each bar represents a frequency.
Choose the bar to be adjusted using button
÷ or ˜ ; the bar chosen starts to flash
and it is possible to adjust it using button N
or O.
To store the new settings, press button AU-
DIO again. The display still shows "USER EQ
SETTINGS".

ANTITHEFT PROTECTION

Refer to section "CD PLAYER".
305

Advertisement

Table of Contents
loading

Table of Contents