Page of 330
Download Print This PagePrint Bookmark Comment
Briefly press button TRIP to select the
two Trip computer modes; use button
- to scroll the options at the top of the
display, use button .. to scroll the op-
tions at the bottom of the display.
Press briefly button TRIP to go from
Trip A to Trip B.
44
Start of journey procedure
(reset)
Trip A and Trip B reset are independent.
Reset Trip A
With electronic key into ignition device,
to reset the "Trip A" press and keep
pressed button TRIP for over 2 sec-
onds.
IMPORTANT Reset can be automat-
ic only in the following cases:
❒ when the "Travel Distance" reaches
9999.9 km or the "Travel Time"
reaches 99.59 (99 hours and 59
minutes);
❒ after disconnecting/reconnecting the
battery.
At Trip A reset a warning message will
be displayed.
IMPORTANT Trip A reset will not re-
set "Range" and "Current Consump-
tion".
Reset Trip B
As concerns the Trip B values, it is pos-
sible to select through the "Setup
Menu" the reset mode (Manual or Au-
tomatic) (see paragraph "Setup Menu"
on previous pages):
❒ manual reset: press and keep pressed
button TRIP for over 2 seconds.
❒ automatic reset: it takes place each
time the electronic key is fitted into
the ignition device.
At Trip B reset a warning message will
be displayed.
IMPORTANT Trip B reset will not re-
set "Range" and "Current Consump-
tion".

Advertising

Comments to this Manuals

Symbols: 0
Latest comments:
  • ROLAND Aug 02, 2016 06:17:
    ENGINE TURNS BUT DONT START. BATTERY IS FULLY CHARGED