Grizzly G1030 Owner's Manual page 13

Assembly
To assemble your machine:
1.
Figure 3.
Figure 3.
2.
Figure 4.
Figure 4.
3.
Figure 5.
Note: When connecting parts that have a
gasket between them, always tighten the
fasteners in a crisscross manner to ensure
the gasket does not become crimped and the
seal compromised.
Figure 5.
4.
Note: The inside of the collectors are funnel
shaped and force the air around in a cyclone
motion. Make sure that the inside taper (fun-
nel) is facing downward and that the collector
inlet flange faces toward the collector body.
Figure 6.
Figure 6