Getting Started; Included In The Box; Items Needed - lifeSMART LS-EF450 Owners Installation And User Manual

Infrared fireplace wall heater
Table of Contents

Advertisement

· Supply: 110-120V~ 60Hz · Rated power: 1500W · Lighting: 40W E12 SES Clear Candle Bulb

Getting Started

· Remove the heater from the box.
· Remove any packaging materials from the product.
· Place the packaging inside the box and either store or dispose of safely.

Included In the Box:

· (Qty 1) Heater (with glass fireplace cover) · (Qty 1) Remote Control· (Qty 1) Instruction Manual
Mounting Hardware Pack: (Qty 1) Long Mounting Bracket · (Qty 1) Short Mounting Bracket
(Qty 6) Long Screws · (Qty 2) Short Screws · (Qty 6) Plastic Wall Plugs
Precautions To Consider Before Mounting
・ 2 People will be required to complete the mounting process.
・ Keep all packaging until you have checked and counted all the parts and the contents of the mounting hardware.
・ The mounting hardware pack contains small items that should be kept away from young children.
・ We suggest that after opening the mounting hardware pack, you place all the contents into a container, to reduce the
risk of losing small pieces.
・ Do not plug in or power up the heater until it is secure to the wall and the instructions are read fully.
・ Please choose a mounting location wisely, prior to starting. A power outlet must be within the cord's reach.
・ The long mounting bracket must be secured horizontally, and the power cable routed to the bottom right of the heater.
・ Please observe the recommended heights and dimensions for mounting the heater. This appliance is designed to be
mounted to a wall at a minimum height of 2 feet from the floor, and a minimum 3 feet from the ceiling (for optimum
heat ventilation).
・ Note that the long mounting bracket will be "hooked" to the heater towards the top, rear edge of the heater, and not
the center. Consider this when mounting the bracket.
・ Take necessary precautions to avoid cutting or damaging any cables or power cords.
・ While drilling holes for the plugs, be cautious of electrical lines, metals, or items beyond the walls.
・ Be sure that the wall you choose to mount on is solid, and will support the heater's approximate weight (30lbs).
・ Make sure that the heater is safely out of the way while you are installing mounting hardware, as it may become a
tripping hazard if left in the open.
・ Please be cautious if you are set on mounting the heater low to the floor, as it may become a safety hazard to
children and pets!

Items Needed:

Advertisement

Table of Contents
loading

Table of Contents