Saving A Cid Record To Phone Book Memory; Deleting A Cid Record; Deleting All Call Records; Dialing Back - RCA 25211 User Manual

Saving a CID Record to Phone Book Memory

1. While viewing a CID record, press the Option soft key.
2. Use the VOL(- or +) button to scroll to Store, press the Select soft key to enter edit mode.
3. Enter Name shows in the display. Input a name. Please refer to section "Handset Name"
for name editing method.
NOTE: A name must be input otherwise the record cannot be stored.
4. Press the Save soft key, Enter number shows in the display.
5. Edit the numbers with the dial pad.
6. Press the Save soft key to enter VIP Tone Melody selection.
7. Use the VOL (- or +) button to scroll to the desired melody.
8. Press Select soft key and you will hear a confirmation tone. Repeat steps 2 through 7 to
save other records.

Deleting a CID Record

1. While viewing a CID record, press the Option soft key.
2. Use the VOL (- or +) button to scroll to Delete, press Select soft key to enter Delete mode.
3. Delete? Will show in the display, press OK soft key to confirm, and you will hear a confir-
mation tone.

Deleting All Call Records

This feature allows you to clear all CID records at once.
1. While viewing a CID record, press the Option soft key.
2. Use the VOL (- or +) button to scroll to Delete All, press Select soft key to enter Delete all
mode.
3. Delete all? Will show in the display, press OK soft key to confirm.
4. A confirm tone emit and Empty shows in the display for about 3 seconds.

Dialing Back

When reviewing CID records, you can dial back the numbers showing on the display by
pressing the HEADSET button, the HANDSET button, the SPEAKER button or either the Line
1 or Line 2 soft key.

If You Programmed Your Local Area Code

1. When reviewing CID records, use the VOL (- or +) button to display the number you want
to dial.
2. If you see a number with 7 digits (i.e.555-1234), then the call was received from within
your area code. However, this does not guarantee the call is a local call. If you see a number
with 11 digits (i.e.1-234-555-1234), then the call received was not from your area code.
3. To adjust the phone number format, press Option soft key and then use the VOL (- or +)
button to enter Format mode, press Format soft key to change the format. For instance, a
7-digit local number sometimes cannot be dialed because it requires a 10-digit or 11-digit
26