Table of Contents
Advertisement
PROGRAMMING THE TELEPHONE
Standby Screen
The handset displays the handset name, date, time, battery status, the quantity of new calls
and the three soft keys status.
NOTE: The three soft keys will change depending on the status of the phone or what menu
you are in.
Programming Functions
The system uses a menu structure to give you access to all of the built-in features. You may
program the following items in main menu: Phone Setting, Display Setting, Sound Settings,
Voice Mail, Priority Settings and Restore Setting.
NOTE: If the handset is out of range, Setup BS and Date/Time are not programmable, and
Unavailable displays as you try to enter these two menus.
NOTE: During programming, you may press the back soft key at any time to return to the pre-
vious menu, and press and hold back soft key for about 2 seconds to exit the the idle mode.
NOTE: If no key is pressed for 30 seconds, the handset will automatically the menu and return
to the standby screen.
Phone Setting
1. Make sure your phone is in standby mode (not in talk mode).
2. Press the Menu soft key on HS the handset to go to the main menu.
3. Press VOL (- or +) button to scroll to Phone Setting.
4. Press Select soft key to confirm and you may program the following items: Date/Time,
Dial mode, Area Code, Auto Answer, 2nd Call Alert and Handset Name.
Date/Time
From the Phone Setting Menu
1. Press the VOL (- or +) button to scroll to Date/Time sub-menu.
2. Press Select soft key to confirm and you may program the following items: Set Date/
Time, Set Format.
Set Date/Time
From the Date/Time sub-menu
1. Use VOL (- or +) button to select Set Date/Time.
2. Press OK soft key to confirm.
3. LCD will display last set time (or, if the device is new or has been reset to default, the
LCD will display 12:00AM 01/01/10)
4. Use the dial-pad to enter digits for the current time and date.
15
Hide quick links:
Advertisement
Table of Contents
