Base Station - RCA 25211 User Manual

Base Station

The phone must be connected to two line (RJ14C) wall jacks to accommodate both lines.
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place
your cordless telephone on a level surface, such as a desktop or tabletop If you choose to,
you may also mount it on the wall.
2. Plug the power supply cord into the power jack on the back of the base and the other
end into an electrical outlet.
3. Connect the telephone line cords:
If you have 2 single-line wall jacks installed in your home or office, you can use adaptors/
couplers (not included) to combine the 2 single telephone lines into 1 dual line. The adap-
tor/coupler may look similar to the one pictured here and can be purchased from your local
telephone products retailer.
Or, you can plug the two includedsingle line telephone cords in to the two jacks on the back
of the telephone.
4. Place the handset and headset in the base cradle. The charge/in use indicator turns on,
verifying the battery is charging.
5. Allow the phone to charge for 14 hours prior to first use. If you don't properly charge the
phone, battery performance is compromised.
CAUTION: Use only the
other power adaptors may damage the unit.
Use only Class (Classe) 2 Power Source 7.5V DC 500mA.
14
T-T007 power adaptor that came with this unit. Using