Display; Audio; Lock; Others - Kenwood M-909DV Instruction Manual

Dvd compact hi-fi component system
Hide thumbs Also See for M-909DV:
Table of Contents

Advertisement

DISPLAY

TV Aspect – Select which screen aspect to use based on the
shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you'll need to defi ne how
you would like widescreen programs and fi lms to be displayed
on your TV screen.
[Letterbox]: This displays a widescreen picture with black
bands at the top and bottom of the screen.
[Panscan]: This fi lls the entire 4:3 screen, cropping the picture
as necessary.
Progressive Scan – Progressive Scan Video provides the
high quality pictures with less fl ickering. If you are using the
Component Video jacks for connection to a TV or monitor that
is compatible with a progressive scan signal, set [Progressive
Scan] to [On].
Press [SELECT/ENTER] to comfi rm your selection.
- If you not press [ENTER] within 10 seconds it will be [OFF].
- If you have no progressive scan TV , in the state progressive
scan [On] will not appear the screen. If you set Progressive Scan
to [On] in error, press and hold [7] key for about 3 seconds. Set
Progressive Scan to [Off ].

AUDIO

DRC (Dynamic Range Control)
clear when the volume is turned down (Dolby Digital only). Set
to [On] for this eff ect.
Vocal
– Select [On] to mix karaoke channels into
normal stereo. This function is eff ective for multi-channel
karaoke DVDs only.

LOCK

To access the lock options, you must enter the 4-digit password.
If you have not yet entered a password you are prompted to do
so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering
number, press [CLEAR] to delete numbers then correct it.
If you forget your password you can reset it. Press [SETUP] and
Input "210499".
The password has now been cleared.
Rating
stricter the rating. Select [UNLOCK] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digits password using the numerical
buttons then press [SELECT/ENTER]. Enter the password
again to confi rm.
[Change]: Enter the new password twice after entering the
current password.
Area code
playback rating level.
This determines which area's standards are used to rate DVDs
controlled by the parental lock. See the Area Codes on page 22.

OTHERS

PBC (Playback Control)
special navigation features that are available on some Video
– Make the sound
CDs. Select [On] to use this feature.
DivX (R) Registration
DivX® VOD (Video On Demand) registration code that allows
you to rent and purchase videos using the DivX® VOD service.
For more information, visit www.divx.com/vod.
Press [SELECT/ENTER] when [Select] icon is highlighted and
you can view the registration code of the unit.
Bit Rate – Select Bit Rate signal speed 96kbps or 128kbps (USB
Rec. Bit rate)
– Select a rating level. The lower the level, the
– Select a code for a geographic area as the
– Playback control provides
– We provide you with the
English
11
|

Advertisement

Table of Contents
loading

Table of Contents