Auto Run - Samsung SPC-3120 User Manual

15. Auto Run

Main Menu/Sequence Setting/Auto Run
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume
Auto Run
Mode OFF
Time 20 SEC
If there is no controller operation by the user for a certain time,
the sequence operation designated by the user will be executed.
Mode :
- HOME : Auto run Home Position (Refet to the Preset Menu.)
- PRESET : Auto run a selected preset number.
- SWING : Auto run a selected Swing mode.
- GROUP : Auto run a selected Group mode.
- TOUR : Auto run a selected Tour mode.
- TRACE : Auto run a selected trace mode.
- A.PAN : Auto run a 360-degree pan. To activate the
panning command, you need to set up the
camera's tilt angle and auto pan speed manually.
- SCHEDULE : Schedule a sequencing action by day and
Time :
Enables setting up an Auto Run duration. (The duration can
ON
be 5~30 seconds, or 1~5 minutes.)
SPEED DOME CAMERA
time. Refer to the next page.
67
User Guide