Functional Description
15. Auto Run
▶ Main Menu/Sequence Setting/Auto Run
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
Status
➡
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
Power On Resume
ON
MD Dwell Time
OFF
➡
Auto Run
Mode
OFF
Time
30 SEC
SPEED DOME CAMERA
More user manuals on
ManualsBase.com
If there is no controller operation by the user for a certain time,
the sequence operation designated by the user will be
executed.
Mode :
- Home : Auto run Home Position (Refet to the Preset
Menu.)
- Preset : Auto run a selected preset number.
- Swing : Auto run a selected Swing mode.
- Group : Auto run a selected Group mode.
- Tour : Auto run a selected Tour mode.
- Trace : Auto run a selected trace mode.
- A.Pan : Auto run a 360-degree pan. To activate the
panning command, you need to set up the
camera's tilt angle and auto pan speed manually.
Time :
Enables setting up an Auto Run duration. (The duration can
be 1~60 seconds, or 1~60 minutes.)
58
User's Manual
Functional Description
P/T Setting
16. Pan/Tilt Limit
▶ Main Menu/P/T Setting/Pan/Tilt Limit
The moving ranges in the Pan/Tilt directions can be limited.
Main Menu
① Camera Setting
Position :
② Sequence Setting
Selecting the Position menu brings up the following screen
③ P/T Setting
if it is for the Pan Limit setting. Move the joystick left and
④ OSD Setting
right to select a movement range from the starting point to
⑤ Alarm Setting
the end.
⑥ Initialize
Status
Start Limit
➡
P/T Setting
① Pan/Tilt Limit
② Area Setting
Enter: Set
③ Area Masking
Prop. P/T
ON
The following picture shows the Tilt Limit setting.
Digital Flip
ON
Image Hold
Move the joystick left and right to select a movement
OFF
⑦ Auto Track1
range from the starting point to the end.
⑧ Auto Track2
➡
Start Limit
Pan/Tilt Limit
① Pan Limit
② Tilt Limit
➡
Enter: Set
Pan/Tilt Limit
On/Off :
① Position
Cancels or activates the Pan/Tilt Limit functions.
② ON/OFF
OFF
SPEED DOME CAMERA
End Limit
⇨
ESC: Exit
Enter: Set
ESC: Exit
End Limit
⇨
ESC: Exit
Enter: Set
ESC: Exit
59
User's Manual