Setting The Device - Samsung SRD-873D User Manual

main menu

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
3. Use the up/down buttons ( ) to move to <Camera>,
and press [ENTER] button.
4. Select <Camera>.
Displays settings window for Video, Audio, CH Name,
SEQ-Dwell Time, Screen Setup and Privacy Region.
5. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Video
- <ON/OFF> : You can turn ON/OFF the selected channel's
camera.
- <Covert1> : Shows information other than the video of
the selected channel.

For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
M 
If the channel is set to <Covert1> or <Covert2> mode, the channel's sound is not hearable.
However, the channel's sound is recorded if its Audio setting is set to <ON>, even the sound is not heard in Live mode.
• Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel's audio is off on the Live screen and not recorded.

Audio output is available for only 1 channel.
50_ main menu
Device
Camera
Storage Device
Remote Device
POS Device
Monitor
Camera
Camera
PTZ
CH Video  Audio CH Name
1 ON  OFF  CAM 01
2 ON  OFF  CAM 02
3 ON  OFF  CAM 03
4 ON  OFF  CAM 04
5 ON  OFF  CAM 05
 
6 ON OFF CAM 06
7 ON  OFF  CAM 07
8 ON  OFF  CAM 08
Screen Setup Privacy Region
OK Cancel
Logout Return
SEQ-Dwell Time 
5 sec 
5 sec 
5 sec 
5 sec 
5 sec 

5 sec
5 sec 
5 sec 
Previous/Next Page