Event Setting - Samsung SRD-873D User Manual

Event Setting

You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <Mailing Service>, and press [ENTER] button.
2. Select <Event>.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Event Interval : Set the event interval.

If a series of events occurs, the e-mail will be sent at the specified
interval, not on each event.
• Use Event Transfer : Select an event type to send if an event
occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4. When the event setup is done, press <OK>.
Group Setting
You can set the group to whom the e-mail is sent, and specify the permission for each group.
You can add recipients for each group in the <Recipient> menu item.
The recipient is set separately from the DVR user group.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Network> window to
move to <Mailing Service>, and press [ENTER] button.
2. Select <Group>.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Add : Select <Add> and use the virtual keyboard to add a
group.

Refer to "Using Virtual Keyboard". (Page 42)
• Delete : Deletes the selected group.
• Rename : You can reset the recipient permission of an existing group.
• Recipient Permission : Set the permission of the recipient group.
4. When the group setup is done, press <OK>.
Mailing Service
Event
SMTP Group
 Event Interval 10 min
 Use Event Transfer
Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Mailing Service
Group
SMTP Event
 Group Add
Recipient Permission

Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Recipient
Tampering
Video Loss
Recipient
Delete Rename
Tampering
Video Loss
English _75