Connection
Using Coaxial Communications
• Coaxial Communications System
• OSD Control method
CAMERA
DVR
SET
MENU/ENTER
UP
UP KEY
DOWN
DOWN KEY
LEFT
LEFT KEY
RIGHT
RIGHT KEY
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below : If the distance between the camera and the monitor exceeds
the recommended maximum, please use an auxiliary video amp.
Notes
• It is recommended that pure copper coax cable is used and not copper coated
steel, as this will cause issues with the communication over the coaxial cable.
CONTROLLER
OSD KEY
JOYSTICK UP
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
DVR
DVD
Distance
300m
450m
600m
20
COLOR DOME CAMERA
SCV-2080
: BNC
•
• ---- : RS-485
Recommended Cable Specification
3C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)