Table of Contents
Advertisement
80
PAN / TILT / ZOOM OVERVIEW
The PTZ controls within the NVR Software allow for powerful control over the cameras. This can be extremely beneficial by increasing
the usefulness of the recorded video. Using the PTZ controls you can create custom preset configurations that can continuously
sweep across large areas.
SETTING UP A PTZ ENABLED NETWORK DEVICE
Setting up a PTZ enabled Network Device is simple. The NVR Software comes equipped with PTZ control features which only need to
be enabled to control the PTZ functions of the Network Device.
To enable PTZ functionality for a camera channel:
1.
Click Setup on the Main Display screen.
2.
Click Camera.
3.
Select the desired camera channel from the Select Camera list.
4.
Select the Enable Network Device PTZ check box.
CREATING AND VIEWING PRESET POSITIONS
A preset position is a user defined location where the camera can be pointed, zoomed in, and focused. You can define preset
positions using the setup features of the connected PTZ enabled device.
Advertisement
Table of Contents
