Table of Contents
Advertisement
48
GENERAL SETUP
Beep on Login Fail
Sequence Setting
Voice Warning
The NVR allows users to play a sound file when either a Motion event or Sensor event occur. This file can be a custom created sound
file that is unique to the application. The selected WAV file is played through speakers attached to the NVR.
1.
Click the Open Sound File icon to browse for a WAV file. The selected file will display in the field on the left
2.
Click the Test icon to verify the audio file
3.
Select Motion Event and/or Sensor Event to trigger the audio file
Enables the NVR to beep continuously in response to a failed login attempt. Only an authorized login will
stop the beeping.
Allows the video out picture to automatically cycle through channels at a set speed. Ex: .Cycle through
channels 1-6 at 4 second intervals.
Open Sound File
Enable Audio Recording
Test
Adjust / Mute Volume
Advertisement
Table of Contents
