Table of Contents
Advertisement
26
MONITOR SETUP
There are up to 2 available connections for monitors which can be used individually or in tandem.
Attach the Monitor or Monitors to the Rear of the NVR unit using the cable supplied by the Monitor Manufacturer. Refer to your monitor
manual for detailed information on how to setup and use it.
NOTE: The monitor must be capable of having a screen resolution of 1024 x 768 and display colors of at least 32 Bit
POWER SETUP
Attach the AC power cable to the rear of the NVR Unit. See Rear Panel Connectors for more information.
WARNING: To reduce the risk of electrical shock or damage to the equipment:
•
Do not disable the power grounding plug. The grounding plug is an important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
•
Disconnect the power from the computer by unplugging the power cord either from the electrical outlet or the
computer.
CONNECTING A VIDEO SOURCE
The NVR, or Network Video Recorder has no visible video inputs because the NVR unit connects and records only using IP / Network
video cameras. To connect video sources to the NVR unit, simply plug in a network cable to the NVR unit.
SVGA Output
To VGA Monitor.
S-Video Output
To TV/VCR.
Advertisement
Table of Contents
