Video Loss Alarm
The NVR Software supports a Video Loss Alarm function, which allows an Alarm Event to log when a camera loses its signal. The
lost signal can be due to Power failure to the network device, the network device cable being cut or unplugged, or the network device
being damaged in some way.
Video Loss Alarm Beep
Video Loss Alarm Log
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network Devices to the NVR Software.
Volume
The volume control allows fine tuning of the volume settings on the NVR.
Volume Options:
•
Slider Controls – Used to adjust the literal volume for the
respective devices listed.
•
Mute Checkbox – Check the mute box to mute volume on
any of the device columns or check the Mute All checkbox to
mute all volume on the NVR.
When Video Loss occurs the speaker attached to the NVR will sound an alarm.
Records the Video Loss Alarm Events to the log files.
49