Table of Contents
Advertisement
Sample case - Type K thermocouple input, autotuned to 147°C:
STEP
1
Mount controller in panel.
Attach T/C & power leads in
accordance with the diagram
on back of controller. Note use
115 VAC or 240 VAC
depending on which power
level is required for the
controller you ordered.
Controller goes through self
check routine. All segments
light up momentarily.
Set the T/C type if no sensor
2
has been selected previously
the controller will display
Function .16, option zero. The
zero will flash.
If the display does not read 0.16 with the zero flashing, then the
unit has already been programmed with a sensor type. Refer to
Section 3.7 and step through to Function .16 and set proper
sensor type. Note other functions may have to be changed as well.
Set, e.g., T/C Type K sensor
(Option 2, see page 31)
Enter T/C type in memory
3
display now reads sensor
temperature, e.g., 23°C
Read setpoint temperature
4
For example 0°C.
82
APPENDIX B
QUICK STARTUP
NOTE
Press
Press P, once
ACTION
Flashing
, twice
Press ★
DISPLAY
1
8
8
8
0.
1
6
2.
1
6
2
3
0
Hide quick links:
Advertisement
Table of Contents
