Randy Ii M - Mobile Configuration - PRESIDENT Randy II Owner's Manual

Before using, be careful never to transmit without first
having connected the antenna, or without having
set - M version only - the SWR (Standing Wave Ratio) !
Failure to do so may result in destruction of the power
amplifier, which is not covered by the guarantee.
MULTI-NORMS TRANSCEIVER!
See function "F" on page 11 and the Norms - F
table on page 38.
The guarantee of this transceiver is valid only
Welcome to the world of the new generation of CB radios. The new
PRESIDENT range gives you access to top performance CB equipment.
With the use of up-to-date technology, which guarantees unprec-
edented quality, your PRESIDENT RANDY II is a new step in personal
communication and is the surest choice for the most demanding of
professional CB radio users. To ensure that you make the most of all
its capacities, we advise you to read carefully this manual before
installing and using your PRESIDENT RANDY II.
A) RANDY II M - MOBILE CONFIGURATION
1) INSTALLATION
- Connect the antenna cable to the antenna connector from the adapter.
- Plug the cigarette lighter plug in the cigarette lighter socket of the car.
- Clip the adapter on the device. See page 11.
2) ANTENNA INSTALLATION
a) Choosing your antenna
- For CB radios, the longer the antenna, the better its results. Your dealer will
be able to help you with your choice of antenna.
b) Mobile antenna
- Must be fixed to the vehicle where there is a maximum of metallic surface
(ground plane), away from windscreen mountings.
WARNING!
in the country of purchase.
3