B. Top Vent Only
•
Locate top heat sheld (Figure 9.2).
•
Remove back screws holding top heat shield
(Figure 9.3).
•
Bend heat shield up. See Figure 9.4.
•
Install fi rst piece of vent pipe (Figure 9.5).
Figure 9.2
Top Heat Shield
Figure 9.3
Remove Screws
38
Heatilator • AVEO Series DV • 4058-210 Rev F • 10/08
Figure 9.4
Bend Heat Shield
Figure 9.5
Begin Vent Installation