Changing Receiver Frequency Setting - Shure U Series User Manual

ENGLISH
4. Press the "SELECT" button to choose Group or Channel. The current Group,
Channel, and TV channel setting will appear, as shown in Figure 13. (Models sold
outside the U.S. and Canada may not display TV channel.)
GROUP CHANNEL
FIGURE 13
5. Press the SELECT button until a line is below the character you want to change,
as shown in Figure 14.
GROUP CHANNEL
FIGURE 14
6. Press either the "+" or "–" button to change the Group or Channel setting. The TV
Channel setting will change automatically. (Models sold outside the U.S. and
Canada may not display TV channel).
7. When the new Group/Channel has been completely entered, press the MENU
button. "SAVE?" will appear on the display, followed by "+ YES – NO". Press the
"+" button to save the new Group/Channel setting or press the "–" button to return
to the original setting. See Figure 15.
FIGURE 15
NOTE: If more than 20 seconds of inactivity elapse, the display will return to the
original settings.
14
TV
TV

Changing Receiver Frequency Setting

1. Press the MENU button. The + MENU – display will appear, as shown in Figure 16.
FIGURE 16
2. Press either the + or – button to reach the SET FREQ display, shown in Figure 17.
FIGURE 17
3. Press the SELECT button. The current operating frequency will be displayed, as
shown in Figure 18.
FIGURE 18
4. Press the "+" or "–" button to increase or decrease the setting in incremental steps
until the desired frequency is reached. See Figure 19.
FIGURE 19
NOTE: The receiver operating frequency actually changes the moment you press
the + and – buttons. As the frequency changes, the G/CH number automatically
changes. By observing the RF lights on the receiver, you can see which frequen-
cies are already being used and avoid interference. If more than 20 seconds of
inactivity elapse, the display will return to the original settings.
ENGLISH
15