Receiver Setup; Installing Rear Mounted Receiver Antennas; Installing Front Mounted Receiver Antennas - Shure U Series User Manual

ENGLISH

RECEIVER SETUP

Installing Rear Mounted Receiver Antennas

Attach the supplied UHF antennas to the antenna BNC connectors on the receiver
back panel, as shown in Figure 5. For best performance, orient the antennas with tips
pointing away from each other at a 45 angle from vertical.
FIGURE 5

Installing Front Mounted Receiver Antennas

1. Insert the two bulkhead adapters through the larger holes on each side of the front
panel, and secure them from each side, using the supplied attaching hardware.
See Figure 6.
BULKHEAD
ADAPTER
FIGURE 6
10
RECEIVER
BULKHEAD
(TOP VIEW)
ADAPTER
2. Connect the supplied antenna cables to the receiver and the bulkhead adapters,
as shown in Figure 7.
ANTENNA
CABLE
FIGURE 7
NOTE: Shure recommends connecting the bulkhead adapter and antenna cables
before mounting the receiver in a rack. Once the receiver is in the rack, it is more diffi-
cult to insert the bulkhead adapters and connect the antenna cables.
3. Insert the receiver into the equipment rack and secure it with the supplied screws.
See Figure 8.
EQUIPMENT RACK
FIGURE 8
4. Attach the supplied UHF antennas to the BNC connectors on the front panel, as
shown in Figure 9. For best performance, orient the antennas with tips pointing away
from each other at a 45 angle from vertical.
FIGURE 9
ENGLISH
ANTENNA
CABLE
RECEIVER
(TOP VIEW)
11