Lithium-Ion 3600 Mah Battery Specifications; Internal Imager; Ea11 Decoded 2D Imager - Psion EP10 User Manual

Appendix B: EP10 Specifications

Lithium-Ion 3600 mAh Battery Specifications

B.4

Lithium-Ion 3600 mAh Battery Specifications

Model Number
Part Number
Chemistry
Battery Voltage
Capacity
Charge Current
Charge Voltage
Charge Method
Discharge Current
Internal Resistance
Storage Temperature
Charge temperature
Discharge Temperature
Charge Taper Current
Charge Time
Pre-condition Charge
Current
Pre-condition Charge Ter-
mination Voltage
Cycle Life
B.5

Internal Imager

This section lists specifications for the EA11 Decoded 2D imager.
B.5.1

EA11 Decoded 2D Imager

Scan Rate
Linear Emulation Mode
Scan Angle
Optical Resolution
Print Contrast
Versions
B-10
Psion EP10 HDK User Manual
Description
RV3010
1100912-000
Lithium-Ion (Li-Ion)
2.7 V ~ 4.2 V (minimum ~ maximum)
3.7 V (nominal)
3600 mAh/13.32Whr (typical)
3450 mAh/12.76 Whr (minimum)
1.72 A (typical)
4.2V +/- 0.05
Constant-current/constant-voltage (CC/CV)
1.72 A (typical)
2.8 A (maximum)
125 m (typical)
-20°C to +60°C (-4°F to +140°F)
0°C to +45°C (32°F to +113°F) (typical)
-20°C to +60°C (-4°F to +140°F) (typical)
48 ~ 120 mA
3 hrs. (typical)
300 ~ 360 mA
3 V
300 charge/discharge cycles with no degradation below 80% of nominal capacity
based on 0.5 C charge / 0.5 C discharge rates (to 3.0 V) @ 23° C.
Parameter
2D mode: 56 images/s auto adaptive
200 scans/s auto adaptive
38.9° (horizontal), 25.4° (vertical)
752 (H) x 480 (V) pixels, 256 gray levels
Down to 25%
Standard range and high density
Specification
Specification