Application; X34 3-Way Stereo; X34 4-Way Mono - Alto X34 User Manual

5. APPLICATION

5.1 X34 3-Way Stereo

If you want to present your X34 Active Crossover in a 3-way stereo application, please connect the unit
in your system as the following illustration step by step:
1. Set Mode switch into stereo Mode.
2. Plug the Left line-in into INPUT 1 and the Right line-in into INPUT 2.
3.Connect the LOW OUT 1 to the Left input of the Low frequency amplifier, and the LOW OUT 2 to the Right
input of the Low frequency amplifier.
4.Connect the MID OUT 1 to the Left input of the Mid frequency amplifier, and the MID OUT 2 to the Right
input of the Mid frequency amplifier.
5.Connect the HIGH OUT 1 to the Left input of the High frequency amplifier, and the HIGH OUT 2 to the Right
input of the High frequency amplifier.
no patch cord required.
110-120V
AC INPUT
220-240V
95-120V /210-240V 60-50Hz
Rated Power Consumption 10W
FUSE:
210-240V: T100mAL 250VAC
95-120V: 200mA 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
3WAY- STEREO
/ (4WAY- MONO)

5.2 X34 4-Way Mono

Otherwise, if you want to present your X34 Active Crossover in a 4-way mono application, please connect
the unit to your system as the following illustration step by step:
1.Set Mode switch to mono Mode.
2.Plug the line-in into INPUT 1.
3.Connect LOW OUT 2 to the Sub frequency amplifier.
4.Connect MID OUT 2 to the Low frequency amplifier.
5.Connect HIGH OUT 2 to the Mid-range frequency amplifier.
6.Connect HIGH OUT 1 to the High frequency amplifier.
HIGH AMP
STEREO MONO
HIGH MID CD
PHASE PHASE BOOST MODE
HIGH OUT 2 / (MID OUT) MID OUT 2 / (LOW OUT) LOW OUT 2 / (SUB OUT)
CHANNEL 2
STEREO
MODE
MID AMP
LOW AMP
PUSH
NEW TIDE
HIGH MID
3
2 1 PHASE PHASE
INPUT 2 / (NOT USED) HIGH OUT 1 / (HIGH OUT) MID OUT 1 (NOT USED) LOW OUT 1 / (NOT USED)
CHANNEL 1
MIXER
8
PUSH
NEW TIDE
CD
3
BOOST 2 1
INPUT 1 / (INPUT)