Ac Power; Power Consumption; Ac Plug; Power Wiring - Iluminarc Inground Tri-3 IP Optic 25 WW User Manual

Ilumipod inground tri-3 ip optic 25 ww
Hide thumbs Also See for Inground Tri-3 IP Optic 25 WW:
Table of Contents

Advertisement

Always connect
the Ilumipod
Inground Tri-3 IP
Optic 25 WW to a
protected circuit with an
appropriate electrical
ground to avoid the risk of
electrocution or fire.
Never connect
the Ilumipod
Inground Tri-3 IP
Optic 25 WW to a rheostat
(variable resistor) or
dimmer circuit, even if the
rheostat or dimmer
channel serves only as a
0 to 100% switch.
Make sure to
connect the
Ilumipod
Inground Tri-3 IP Optic 25
WW to a power line with
the proper voltage and
frequency, as per the
specifications in this User
Manual or on the product's
sticker.
The listed current
rating indicates
the maximum
current draw
during normal operation.
If you choose to
bury the power or
signal distribution
boxes, make sure that
they are IP67-rated or
greater.
Ilumipod Inground Tri-3 IP Optic 25 WW User Manual Rev. 3

AC Power

The Ilumipod Inground Tri-3 IP Optic 25 WW has an auto-ranging power supply that works
with an input voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage, as per the specifications
in this User Manual or on the product's sticker.

Power Consumption

To determine the power requirements for the Ilumipod Inground Tri-3 IP Optic 25 WW, refer
to the label affixed to the side of the product. Alternatively, you may refer to the
Specifications.
The listed current rating indicates the maximum current draw during normal operation.

AC Plug

The Ilumipod Inground Tri-3 IP Optic 25 WW comes with a bare-ended power input cord for
hardwired installation. Use the table and the illustration below to wire a plug.
Connection
AC Live
AC Neutral
AC Ground

Power Wiring

You can connect the bare-ended, IP67-rated AC power cable from the product to an IP67-rated
power connector or IP67-rated junction box.
If using junction boxes, make sure to use IP67-rated conduit for surface installations.
Wire (U.S.)
Screw Color (U.S.)
Black
Yellow or Brass
White
Silver or Gray
Green/Yellow
Green
Installation
Technical
Wire (Europe)
IP67 Pin
Brown
1
Blue
2
Green/Yellow
3
7

Advertisement

Table of Contents
loading

Table of Contents