Daikin Altherma HT User Manual page 7

Useful functions on your
Daikin Altherma controller
Central heating operation
This option will operate if you have a room
thermostat controller installed. Use the
button on the Daikin controller to switch
on/off central heating. When the
room temperature is displayed too.
Use the
buttons to increase or decrease your desired
room temperature. The maximum room
temperature setting is 32°C.
and
and
Reheat function
This mode will prevent your tank from cooling
down lower than a specified temperature
(as set-up by your installer). This will ensure your
tank is always at a minimum temperature so you
are less likely to run out of hot water.
On your Daikin controller press the
button for 5 seconds to enable reheat. The
icon will be displayed on your screen. To turn off
the reheat function, press the
The icon will disappear.
button.
User Guide – Altherma HT
5