Mazda Tribute (j14) Owner's Manual page 244

Maintenance and Specifications
Fluid Classification
4
Engine coolant Mazda
yellow-colored
Premium Engine
Coolant
Rear axle API service
lubricant GL-5, SAE
80W-90
Premium Rear
Axle Lubricant
Windshield N/A
washer fluid
1
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your scheduled maintenance
section to determine the correct service interval.
2
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
4
Add the coolant type originally equipped in your vehicle. DO NO MIX
different colors or types of coolant. DO NOT USE Extended Life Engine
Coolant (orange in color). Refer to Adding engine coolant in this
chapter.
5
Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
For further information on your lubrication specifications, see your
authorized Mazda dealer.
244
2005 Mazda Tribute (j14)
Owners Guide (post-2002-fmt)
USA English (fus)
Application Capacity
2.3L I4 engine 5.0L
with manual (5.3 quarts)
transaxle
2.3L I4 engine 6.0L
with automatic (6.3 quarts)
transaxle
3.0L V6 Duratec 10.0L
engine with (10.6 quarts)
automatic
transaxle
4X4 1.4L
(2.96 pints)
All 2.6L
(2.7 quarts)
5