Mazda Tribute (j14) Owner's Manual page 110

Seating and Safety Restraints
The tether strap anchors in your vehicle are in the following positions:
WARNING: Attach the tether
strap only to the appropriate
tether anchor as shown. The
tether strap may not work
properly if attached
somewhere other than the
correct tether anchor.
1. Position the child safety seat on the passenger seat cushion.
2. Route the child safety seat tether strap over the back of the seat.
NOTE: For vehicles with adjustable head restraints, route the tether
strap under the head restraint and between the head restraint posts,
otherwise route the tether strap over the top of the seatback.
NOTE: For vehicles with adjustable head restraints, route the tether
strap over the top of the seatback.
3. Locate the correct anchor for
the selected seating position.
NOTE: There are three tether
anchors located on the headliner at
the rear of the vehicle.
WARNING: If the tether strap
is clipped incorrectly, the child
safety seat may not be
retained properly in the event
of a collision. If the safety seat
is not anchored properly, the
risk of a child being injured in
a collision greatly increases.
110
2005 Mazda Tribute (j14)
Owners Guide (post-2002-fmt)
USA English (fus)