Mazda Tribute (j14) Owner's Manual page 163

If equipped with a tether, perform the following additional steps:
4. Lift the spare tire on end to
access tether attachment (1).
5. Use the lug wrench to remove
the lug nut from the spare tire
tether.
6. If not replacing the spare or flat
tire, raise winch up into the
installed position.
7. Use the attached Velcro strap
(2) to tie the tether end to the
winch actuator shaft (if
equipped).
2005 Mazda Tribute (j14)
Owners Guide (post-2002-fmt)
USA English (fus)
Roadside Emergencies
163